MRM Engraving




Introducing the new
G-Max ReHab Kit


Engraving is a very exacting operation- one of the most demanding of all human endeavors. Doing it with anything less than a perfectly tuned machine doesn't make artistic or economic sense. While these units are very well engineered, they don't work perfectly right up until the very moment they don't work at all.

If your GraverMax is more than a few years old or has high operating hours, it most likely suffers from 'hardening of the arteries'. Ozone generated by the motor degrades the internal tubing (similar to UV exposure), making it stiff and prone to rupture. Once soft & supple, it becomes like brittle wax. The result is sluggish pedal response and erratic handpiece performance. This happens very gradually- you probably don't even realize how much it's affecting your machine- or your engraving!


The G-Max ReHab Kit is the cure!
In about a half hour, you can install fresh, flexible tubing and breathe new life into your tired machine. The real advantage to this kit is the handy Clean-out Tool, which turns the drudgery of digging decayed tubing out of the brass fittings into a few quick twists of the wrist! If you're at all adept with basic tools (you can engrave, right?), your machine will be running like new in less time than it would take to pack & ship for service, at a fraction of the cost! No packing, no shipping, no waiting, no lost shop time, no hassle- you're back in business in minutes! Even if you're not a big believer in the 'preventive' part of preventive maintenance, wouldn't be nice to know you can deal with a failed tube whenever it happens?

 

Go from this...

gmax_rehab_kit

...To This

GraverMax Rehab Kit


Price of basic kit is $40.00, which includes 30" of tubing, 10 new compression collars, 1 clean-out tool, instructions & postage within the continental US.
Additional .250" Dia. tubing & collars are available for foot pedals & standard size handpieces (not Monarchs, etc.) @ $1.50/ft for tubing & $1.00 ea. for collars.

 

(Click Here For Instructions)

Please Note: As the design of the GraverMax has evolved, the fittings used to connect the internal tubing have also changed. You may want to take a moment to open your unit and see if you only require new tubing, not replacement collars and a clean-out tool for the old style compression fittings. If you'd prefer to send me a digital photo of the inside (I can't tell from just the outside or serial #), I'll do my best to advise you.

Due to large minimum wholesale quantities (for example, tubing comes in 500 ft. rolls), it will not be economically feasible to continue offering these kits once demand drops below a certain level. I'd strongly suggest getting a kit now, even if you're not currently experiencing problems, and perhaps a spare for future needs, in anticipation of this eventuality. I apologize for any inconvenience and hope you understand this situation.

Note: MRM Engraving is not affiliated in any way with GRS. Also, buyer assumes ALL liability-
MRM Engraving is NOT responsible for any injury or damage incurred in the use of this product.

 

______________________________________________________________________________________

Until I'm able to set up a retail storefront for ordering directly through this site, please send an email listing what you want to purchase and I'll calculate the total with shipping and get right back to you. At that point, you can choose to either send a check, or request a PayPal invoice that can be paid by credit card. (Note: you do NOT need a PayPal account to make a payment thru their service.)

______________________________________________________________________________________

 


 

 

MITCHELL R. MOSCHETTI

352 Angeline Drive, Mills River, NC 28759

828-891-4305 • mitch@mrmengraving.com
custom knives & jewelry, hand engraving, hand engraver, jewelry engraving,
banknote, gun engraving, master engraver, master engraving, gravers, graver, platinum ring engraving, bulino engraving
, engraving school, engraving classes, hand engraving tools,
custom knife engraving, gun engraving, custom engraving, learn to engrave, engraving classes, engraving school, metal engraving tool, hand engraving tools, hand engraving for jewelers, learn hand engraving, engraving training classes, ring engraving, engraving supplies, hand engraver equipment, gravermax repair, gravermax tubing, gravermax maintenance, gravermax rehab, gravermax fix, gravermax refurbishing, gravermax lines, gravermax kit, gravermax, gold inlay, engraver handpieces, engraving handpieces, how to engrave, how-to engrave, cylinder blocks, engraving fixtures, engraving fixturing, jewelry fixtures, fixture blocks, fixturing blocks, jewelry fixtures, jewelry fixturing, Jett-Sett, Jett Sett, Thermo-loc, pitch blocks, engraver's pitch, burgundy pitch, chaser's cement, diamond setter's cement